IndustriConnect MQTT / Sparkplug MCP
MQTT client that publishes, subscribes, and decodes Sparkplug B instead of handing the model raw bytes.
Who it's for
An engineer attaching an MCP client to MQTT / Sparkplug. Treat the write policy as the safety boundary: a gated write is still a write once you arm it.
Caveat / limitations
MIT server for any MQTT 3.1.1 broker, with Sparkplug B encode and decode. The mock edge nodes need a separate broker such as Mosquitto. Publishing is a write: it stays gated. This is one of the few public servers that actually implements Sparkplug rather than plain MQTT.
Protocols
Sources
- Repositoryhttps://github.com/IndustriAgents/MQTT-MCP
- IndustriAgentshttps://industriagents.com/connect
This page: https://otaihub.com/tools/industri-connect-mqtt
Same category
- CODESYS Development System MCP ServerOfficial CODESYS add-on that lets an MCP client read and write the open project, compile, and fix Structured Text.
- IndustriConnect Modbus MCPOpen-source Modbus TCP, UDP, and RTU client for MCP hosts, with a mock device and writes off by default.
- IndustriConnect OPC UA MCPPython and Node OPC UA MCP servers with the same tools: browse, read, history, alarms, and gated writes.
- IndustriConnect EtherNet/IP MCPLogix tag client for ControlLogix, CompactLogix, and Micro800, using pycomm3, plus a JSON mock.