IndustriConnect EtherNet/IP MCP
Logix tag client for ControlLogix, CompactLogix, and Micro800, using pycomm3, plus a JSON mock.
Who it's for
An engineer attaching an MCP client to EtherNet/IP. Treat the write policy as the safety boundary: a gated write is still a write once you arm it.
Caveat / limitations
Reads and, if you arm it, writes named tags, arrays, strings, and batches, and can list the tag database. The mock is a JSON bridge, not a real PLC, and needs ENIP_JSON_BRIDGE. Writes are off by default. Tag writes on a running Logix controller are process writes. Keep this on a lab network.
Protocols
Sources
- Repositoryhttps://github.com/IndustriAgents/EtherNetIP-MCP
- IndustriAgentshttps://industriagents.com/connect
This page: https://otaihub.com/tools/industri-connect-ethernetip
Same category
- CODESYS Development System MCP ServerOfficial CODESYS add-on that lets an MCP client read and write the open project, compile, and fix Structured Text.
- IndustriConnect Modbus MCPOpen-source Modbus TCP, UDP, and RTU client for MCP hosts, with a mock device and writes off by default.
- IndustriConnect OPC UA MCPPython and Node OPC UA MCP servers with the same tools: browse, read, history, alarms, and gated writes.
- IndustriConnect MQTT / Sparkplug MCPMQTT client that publishes, subscribes, and decodes Sparkplug B instead of handing the model raw bytes.