IndustriConnect DNP3 MCP
DNP3 master for outstations and serial-to-TCP gateways, with a mock outstation.
Who it's for
An engineer attaching an MCP client to DNP3. Treat the write policy as the safety boundary: a gated write is still a write once you arm it.
Caveat / limitations
Python master using dnp3py. IndustriAgents says CI also tests against an OpenDNP3 outstation. This is a utility/SCADA protocol. Operate and select-before-operate commands are control, so leave the write switch off until you mean it.
Protocols
Sources
- Repositoryhttps://github.com/IndustriAgents/DNP3-MCP
- IndustriAgentshttps://industriagents.com/connect
This page: https://otaihub.com/tools/industri-connect-dnp3
Same category
- CODESYS Development System MCP ServerOfficial CODESYS add-on that lets an MCP client read and write the open project, compile, and fix Structured Text.
- IndustriConnect Modbus MCPOpen-source Modbus TCP, UDP, and RTU client for MCP hosts, with a mock device and writes off by default.
- IndustriConnect OPC UA MCPPython and Node OPC UA MCP servers with the same tools: browse, read, history, alarms, and gated writes.
- IndustriConnect MQTT / Sparkplug MCPMQTT client that publishes, subscribes, and decodes Sparkplug B instead of handing the model raw bytes.